Sony SAL16105 Service Manual page 77

2. Checking Method
1) Set the focus to the near position and zoom to the WIDE position.
2) Peel off the polyester tape shown in Fig.4-10-2 and open a little the main flexible unit with tweezers. Then, loosen two screws fixing
the focus brush.
Focus Brush
Screw
[Search Focus Adj Point]
3) Click the
4) In case of the focus is at the focus adjustment point(near position or infinity position), the pop-up window as shown below appears on
the screen and tighten up two screws secured the focus brush at the point.
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
Main Flexible Unit
Fig.4-10-2
.
Fig.4-10-3
Fig.4-10-4
Fig.4-10-5
Set the focus near position
4-35