In case of the zoom is at the zoom adjustment point, the pop-up window as shown below appears on the screen, fix by applying the
polyester tape to secure the zoom brush at the point.
Confirm the zoom adjustment point doesn't go out of order with setting it to TELE position or WIDE position again.
3. In case of error display in the Search Zoom Adjustment Point
In spite of the zoom is at the zoom adjustment point(TELE position or WIDE position), the pop-up window as shown below appears
on the screen, find out the zoom adjustment point by adjusting from right to left the part R of the zoom brush is going to be at the
lack of pattern on the flexible board.
Perform "2.Adjusting Method" again.
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)