Download  Print this page

Advertisement

HELP03-03
Adhesive bond (B-40): J-6082-614-A
Grease (G-116):
1.
Apply the grease (G-116) to the grooves of the first cam ring (9 portions).
2.
Adjust to be in phase the zoom cam ring and the fixed barrel as shown in the picture (Fig. a).
3.
Adjust to be in phase the first cam ring and the fixed barrel assy as shown in the picture (Fig. b) and install them.
Cut Portion
First Cam Ring
Apply the grease (G-116)
Screw Hole A
Two Screw Holes
Stopper of the
Zoom Cam Ring
Fixed Barrel Assy
4. Install the three 1st lens block operation rollers.
5. Apply the adhesive bond (B-40) to about two threads from the tips of stopper screws and tighten them.
Apply the adhesive
bond (B-40)
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
J-6082-628-A
Apply the grease (G-116)
1st Lens Block
Operation Roller
Zoom Cam Ring
(Fig.a)
First Cam Ring
(Fig.b)
Two Screw Holes
Apply the adhesive
bond (B-40)
Fixed Barrel
Cut Portion
Screw Hole A
Stopper of the
Zoom Cam Ring
Stoppers of the
Zoom Cam Ring
Two Screw Holes
Fixed Barrel
Assy
HELP

Advertisement

Table of Contents

   Also See for Sony SAL16105

   Related Manuals for Sony SAL16105

Comments to this Manuals

Symbols: 0
Latest comments: