Download  Print this page

Advertisement

HELP03-04
Adhesive bond (B-40): J-6082-614-A
1.
Adjust to be in phase the zoom cam ring and the fixed barrel as shown in the picture (Fig. a).
2.
Insert the second lens holder to the fixed barrel and adjust them to be in phase as shown in the picture (Fig. b).
Fixed Barrel
Groove
Zoom Cam Ring
Second Lens Holder
3.
Install the 2nd lens block hold shaft into the second lens holder, then install the 2nd lens block guide roller, 2nd lens block guide shaft
and 2nd guide roller spring 400 H2.
4.
Apply the adhesive bond (B-40) to about two threads from the tips of stopper screws and tighten them.
2nd Guide
Roller Spring 400 H2
Apply the adhesive
bond (B-40)
2nd Lens Block
Guide Shaft
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
Fixed Barrel Assy
Cutout
Scratched Line
2nd Lens Block Hold Shaft
2nd Lens Block
Guide Roller
Second Lens Holder
Zoom Cam Ring
Fixed Barrel
(Fig.a)
Two Screw
Holes
Second Lens
Holder
(Fig.b)
Apply the adhesive
bond (B-40)
Groove
Two Screw
Holes
Stoppers of the
Zoom Cam Ring
Scratched Line
Cutout
2nd Lens Block
Hold Shaft
Second Lens
Holder
HELP

Advertisement

Table of Contents

   Also See for Sony SAL16105

   Related Manuals for Sony SAL16105

Comments to this Manuals

Symbols: 0
Latest comments: