Note - Sony SAL16105 Service Manual

(From Page
2-9.)
B-40
1st Lens Block
Guide Roller
1st Lens Block
Guide Shaft
Note (Assembling)
Zoom Cam Ring
Fixed Barrel
Install 1st Lens Block Guide
Shaft in the direction as
shown in the figure.
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
B-40
First Cam Ring,
Zoom Cam Ring,
Fixed Barrel,
Second Lens Holder
Adjust the phase between Zoom Cam
Ring and Fixed Barrel and then install
1st Lens Block Guide Shaft.
2-10
Note (Assembling)
Set the position the screw hole on 1st
Lens Block Guide Shaft can be seen
through the screw hole on the Front
Lens Barrel.
1st Lens Block
Guide Shaft
Screw Hole on the
Front Lens Barrel
Two Scerw Holes
of the Fixed Barrel
Mark
Note (Assembling)
Align the Two Scerw Holes of
the Fixed Barrel, with the Mark,
as shown in the figure.
4
(See Page
2-11.)
A
3
(See Page
2-11.)
1st Lens Block Guide Barrel,
Front Lens Barrel R Assy
B