Download  Print this page

Advertisement

HELP02-01
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-118):
1.
Apply the anti-diffusion agent (A-20) to the lens mount block as shown in the figure.
2.
Apply the grease (G-118) to the lens mount block as shown in the figure.
3.
Insert the preset lever to the tip of aperture operate plate lever.
Apply the anti-diffusion agent (A-20)
Apply the grease (G-118)
(Apply the grease (G-118) to 3-5 mm
from the edge on rear side of claw)
Claw
3 to 5mm
4.
Pass Connection board through the lens mount block and in the middle of preset lever insertion, turn the lens mount block in the
arrow direction, adjust screw hole positions and secure with four screws.
Screw Hole
Connection Board
Back Adjustment
Washer
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
Note for assembling and grease applying positions are shown.
J-6082-680-A
Hole for Coupler
Apply the
grease (G-118)
Lens Mount Block
Hole for Coupler
Coupler
Screw Holes
HELP
Back Adjustment
Washer
Lens Mount Block
Preset Lever
Tip of Aperture Operate
Plate Lever
HELP

Advertisement

Table of Contents

   Also See for Sony SAL16105

   Related Manuals for Sony SAL16105

Comments to this Manuals

Symbols: 0
Latest comments: