Download  Print this page

Advertisement

4)
When the wide position check finishes normally, the message "Move Zoom to Tele position. Then push [ENTER]." is displayed on
the pop-up window.
Set the zoom to tele position and press down the ENTER key.
5)
When the wide position check finishes normally, the message "Reverse Zoom to Tele position at about 5sec." is displayed on the pop-
up window.
Set the zoom to the tele position and press down the ENTER key.
6)
When the wide position check finishes normally, the message "Reverse Zoom to Tele position at about 5sec." is displayed on the pop-
up window.
Set the zoom to the tele position and press down the ENTER key.
7)
When the tele position check finishes normally, the message "Move Focus to Near position. Then push [ENTER]." is displayed on
the pop-up window.
Set the focus to near position and press down the ENTER key.
8)
When the near position check finishes normally, the message "Move Focus to Infinity position. Then push [ENTER]." is displayed on
the pop-up window.
Set the focus to infinity position and press down the ENTER key.
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
Fig.4-12-4
Fig.4-12-5
Fig.4-12-6
Fig.4-12-7
Fig.4-12-8
4-41

Advertisement

Table of Contents

   Also See for Sony SAL16105

   Related Manuals for Sony SAL16105

Comments to this Manuals

Symbols: 0
Latest comments: