Download  Print this page

Advertisement

HELP04-01
Grease (G-116): J-6082-628-A
Grease (G-118): J-6082-680-A
1.
Allow mount shielding O-ring to absorb all the grease (G-116) it can.
2.
After installing the mount shield O-ring, apply the grease (G-118) to the indicated portion.
Mount Shielding O-Ring
HELP04-02
Adhesive bond (B-110): J-6082-617-A
1.
Install the support plate and put it in the arrow direction.
2.
Apply the adhesive bond (B-110) between the support plate and the outer cover block carefully as shown below.
Support Plate
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
Note for assembling and grease applying positions are shown.
Allow mount shielding O-ring to
absorb all the grease (G-116) it can.
Apply the grease (G-118)
Support Plate
HELP
Do not spread out
to the groove for
the Mount Shielding
O-ring
Do not apply it
to the edge of the
Outer Cover Block
Outer Cover Block
Lib of the Outer Barrel
Center
To a little
over
the top
Mount Shielding O-Ring
Apply the adhesive
bond (B-110)
Support Plate
HELP

Advertisement

Table of Contents

   Also See for Sony SAL16105

   Related Manuals for Sony SAL16105

Comments to this Manuals

Symbols: 0
Latest comments: