3.
Set the following contents in the SETUP window.
• Model
• Language
• State
• Process
Confirm that all of the items are set, and click [OK].
4.
4-1-6. About Inspection Procedure of Lens Adjustment Program (ActuatorChecker2)
The inspection method has the method of executing the method of inspecting the corresponding model as everything continues and the
inspection of each item one by one.
[START]
Click
from the start up window when you inspect the corresponding model as everything continues.
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
Model to be adjustment this time
English
Final
Service
Fig.4-1-23
4-13