Table of Contents
Advertisement
11. Measuring menus
Measuring point selection
The 1st measuring channel is always the selected measuring point.
This can be selected directly as in any menu by means of
or
...
To change the other channels, the measuring point
PROG
and
must be selected as function by pressing key(s) :
or
...
The selected measuring point can now be changed :
...
< M ▲>
< M ▼>
,
To cancel the process of measuring point selection press :
<ESC>
To set the display range the functions analog start and analog end in the
menu should be used; (see 13.12.3). Having selected these
special functions
PROG
functions they can be entered by pressing key(s)
and
... or they
can be entered directly on the appropriate axis; (see 9.5).
11.6 User menus
Despite these flexible combinations of measuring menus and function menus
(see 12) there are still certain applications where an individual collection of func-
tions would be desirable. This is the purpose of user menu
U1 Data log-
which can be also be assembled and configured completely freely using
ger
the ALMEMO
-Control software. You can choose the functions you require from
®
the following list and arrange these on the display exactly as you wish; the only
restriction is the available space, namely 7 rows.
33
- Quick Links:
- Technical Data
Hide quick links:
Advertisement
Table of Contents
