Model Number Interpretation - Honeywell UDC3200 Product Manual

2.3 Model Number Interpretation

Introduction
Write your controller's model number in the spaces provided below and circle the corresponding
items in each table. This information will also be useful when you wire your controller.
KEY NUMBER - UDC3200 Single Loop Controller
Digital Controller for use with 90 to 264Vac Power
Digital Controller for use with 24Vac/dc Power
TABLE I - Specify Control Output and/or Alarms
Output #1
Output #2 and Alarm
#1 or Alarms 1 and 2
TABLE II - Communications and Software Selections
Communications
Software Selections
Reserved
Infrared interface
TABLE III - Input 1 can be changed in the field using external resistors
Input 1
Input 2
12/04
Instructions
Select the desired key number. The arrow to the right marks the selection available.
Make the desired selections from Tables I through VI using the column below the
proper arrow. A dot ( ) denotes availability.
Key Number I
_ _ _ _ _ _ - _ _ - _ _ _ _
Description
Current Output (4 to 20ma, 0 to 20 ma)
Electro Mechanical Relay (5 Amp Form C)
Solid State Relay (1 Amp)
Open Collector transistor output
Dual 2 Amp Relays (Both are Form A) (Heat/Cool Applications)
No Additional Outputs or Alarms
One Alarm Relay Only
E-M Relay (5 Amp Form C) Plus Alarm 1 (5 Amp Form C Relay)
Solid State Relay (1 Amp) Plus Alarm 1 (5 Amp Form C Relay)
Open Collector Plus Alarm 1 (5 Amp Form C Relay)
None
Auxiliary Output/Digital Inputs (1 Aux and 1 DI or 2 DI)
RS-485 Modbus Plus Auxiliary Output/Digital Inputs
10 Base-T Ethernet (Modbus RTU) Plus Auxiliary Output/Digital Inputs
Standard Functions, Includes Accutune
Math Option
Set Point Programming (1 Program, 12 Segments)
Set Point Programming Plus Math
No Selection
Infrared Interface Included (Can be used with a Pocket PC)
TC, RTD, mV, 0-5V, 1-5V
TC, RTD, mV, 0-5V, 1-5V, 0-20mA, 4-20mA
TC, RTD, mV, 0-5V, 1-5V, 0-20mA, 4-20mA, 0-10V
Carbon, Oxygen or Dewpoint (Requires Input 2)
None
TC, RTD, mV, 0-5V, 1-5V, 0-20mA, 4-20mA
TC, RTD, mV, 0-5V, 1-5V, 0-20mA, 4-20mA, 0-10V
Slidewire Input (Requires two Relay Outputs)
UDC3200 Universal Digital Controller Product Manual
II III IV
- _ _ _ - _ _ _ _ _ -
Installation
V VI
_ _ _
Selection Availability
DC3200
DC3201
C _
E _
A _
T _
R _
_ 0
_ B
_ E
_ A
_ T
0 _ _ _
1 _ _ _
2 _ _ _
3 _ _ _
_ 0 _ _
_ A _ _
_ B _ _
_ C _ _
_ _ 0 _
_ _ _ R
1 _ _
2 _ _
3 _ _
1 6 0
_ 00
_ 10
_ 20
_ 40
15