Lockout Feature; Table 4-1 Procedure To Enter A Security Code - Honeywell UDC3200 Product Manual

Monitoring and Operating the Controller
Step Operation
Enter Set Up
1
Mode
2 Select any Set
Up Group
Security Code
3
Entry

4.4 Lockout Feature

Introduction
The lockout feature in the UDC3200 is used to inhibit changes (via keyboard) of certain
functions or parameters by unauthorized personnel.
Lockout levels
There are different levels of Lockout depending on the level of security required. These
levels are:
• NONE
• CALIB
• +CONFIG Timer, Tuning, SP Ramp, and Accutune are Read/Write. All other Setup
• +VIEW
• ALL
See Subsection 3.4 - Tuning Parameters Set Up Group prompts to select one of the
above.
Security Code (see Subsection 4.3)
98

Table 4-1 Procedure to Enter a Security Code

Press
Upper Display = SET UP
Setup Setup
Lower Display = TUNING
Upper Display = 0
Function Function Function
Lower Display = SECUR
To enter a four digit number in the upper display
or
This will be your security code.
No Lockout. All groups Read/Write.
Calibration prompts are deleted from the Setup List.
are Read only. Calibration Group is not available.
Timer, Tuning, and SP Ramp are Read/Write. No other parameters are
available.
Timer, Tuning, and SP Ramp are Read only. No other parameters are
viewable.
UDC3200 Universal Digital Controller Product Manual
Result
(0001 to 9999)
12/04