Configuration
3.1 Overview
Introduction
Configuration is a dedicated operation where you use straightforward keystroke
sequences to select and establish (configure) pertinent control data best suited for your
application.
To assist you in the configuration process, there are prompts that appear in the upper and
lower displays. These prompts let you know what group of configuration data (Set Up
prompts) you are working with and also, the specific parameters (Function prompts)
associated with each group.
Table 3-1 shows an overview of the prompt hierarchy as it appears in the controller.
What's in this section?
The following topics are covered in this section.
3.1 Overview
3.2 Configuration Prompt Hierarchy
3.3 Configuration Procedure
3.4 Tuning Set Up Group
3.5 SP Ramp Set Up Group
3.6 Accutune Set Up Group
3.7 Algorithm Set Up Group
3.8 Output Set Up Group
3.9 Input 1 Set Up Group
3.10 Input 2 Set Up Group
3.11 Control Set Up Group
3.12 Options Set Up Group
3.13 Communications Set Up Group
3.14 Alarms Set Up Group
3.15 Display Set Up Group
3.16 Configuration Record Sheet
36
3 Configuration
Table 3-1 Configuration Topics
TOPIC
UDC3200 Universal Digital Controller Product Manual
See Page
36
37
39
40
44
48
50
60
64
68
71
78
84
87
92
94
12/04