Setting The Menu And Message Languages - YOKOGAWA WT1800 User Manual

3.4

Setting the Menu and Message Languages

This section explains how to set the language that is used to display the menus and messages on the
screen. The factory default setting is ENG (English).
UTILITY System Config Menu
Press UTILITY, the System Config soft key, and then the Language soft key to display the following
menu.
Setting the Menu Language (Menu Language)
You can choose to display menus using one of the following languages.
• English
• Japanese
• Chinese
• German
• Russian
Setting the Message Language (Message Language)
Error messages appear when errors occur. You can choose to display these messages and the help (see
section 3.7) using one of the following languages. The error codes that accompany error messages
are the same for all languages. For more information about error messages, see section 5.2.
• English
• Japanese
• Chinese
• German
• Russian
1 This features covers firmware versions 2.01 or later of the WT1800.
2 This features covers firmware versions 2.21 or later of the WT1800.
Note
• Even if you set the menu or message language to a language other than English, some terms will be
displayed in English.
• You can specify different menu and message languages. However, you cannot set Japanese and Chinese
to the menu language and the message language at the same time. For example, if you specify Japanese
as the menu language and Chinese as the message language, the menu language will also be set to
Chinese.
3-10
Set the menu language.
Set the message language.
1
1
2
1
1
2
IM WT1801-03EN