YOKOGAWA WT1800 User Manual page 57

2.12 Loading Roll Paper into the Built-In Printer (Option)
Feeding Paper
Press SHIFT+PRINT (MENU) to display the following menu.
Cutting Roll Paper
After you load roll paper and close the cover or after you print measured data, to cut the roll paper, pull
the paper up against the top of the cover.
Note
• If you open the printer cover immediately after you cut the roll paper, repeat steps 5 to 7 on pages 2-26
and 2-27.
• After you load roll paper and close the cover, check whether the paper feeds correctly. If the roll paper
does not feed straight, repeat steps 1 to 7 on pages 2-26 and 2-27.
• If you load the roll paper backwards, the paper may not feed properly or data may not be printed. This is
because the print head doesn't come into contact with the thermal side of the paper. Load the roll paper
into the holder in the proper orientation.
2-28
Feeds paper
Each time that you press this soft key, the WT1800 feeds approximately 3 cm of the roll paper.
IM WT1801-03EN