Usb For Peripherals; Built-In Printer (Option); Safety Terminal Adapter - YOKOGAWA WT1800 User Manual

6.17 USB for Peripherals

Item
Number of ports
Connector type
Electrical and mechanical
specifications
Supported transfer modes
Compatible devices
Power supply

6.18 Built-in Printer (Option)

Item
Print system
Dot density
Sheet width
Valid recording width
Auto print

6.19 Safety Terminal Adapter

Item
Maximum allowable current 36 A
Dielectric strength
Contact resistance
Contact section
Insulator
Core wire
Insulation
6-20
Specifications
2
USB type A (receptacle)
Complies with USB Rev. 2.0
HS (High Speed; 480 Mbps), FS (Full Speed; 12 Mbps), LS (Low Speed; 1.5 Mbps)
Mass storage devices that comply with USB Mass Storage Class Ver. 1.1
104 or 109 keyboards that comply with USB HID Class Ver. 1.1
Mouse devices that comply with USB HID Class Ver. 1.1
5 V, 500 mA (for each port) You cannot connect devices whose maximum current consumptions
exceed 100 mA to two different ports on the WT1800 at the same time.
Specifications
Thermal line dot system
8 dots/mm
80 mm
72 mm
Set the interval at which you want to print measured values automatically.
You can set the start and stop times.
Specifications
1000 V CATIII
10 mΩ or less
Nickel plating on brass or bronze
Polyamide
Maximum diameter 1.8 mm
Maximum diameter 3.9 mm
IM WT1801-03EN