YOKOGAWA WT1800 User Manual page 59

3.1 Key Operation and Functions
RESET Key Operation
If you press RESET when you are using the cursor keys to set a value or select an item, the setting
is reset to its default value (depending on the operating state of the WT1800, the setting may not be
reset).
SET Key Operation
The operation varies as indicated below depending on what you are setting.
• For a soft key menu that has two values that you use the cursor keys to adjust
Press SET to switch the value that the cursor keys adjust.
• For a menu that has the cursor keys + SET mark (
Press SET to confirm the selected item.
Cursor Keys Operations
The operation varies as indicated below depending on what you are setting.
• When setting a value
Up and down cursor keys:
Increases and decreases the value
Left and right cursor keys:
Changes which digit to set
• When selecting the item to set
Up and down cursor keys:
Moves the cursor between settings
How to Enter Values in Setup Dialog Boxes
1.
Use the keys to display the appropriate setup dialog box.
2. Use the cursor keys to move the cursor to the item that you want to set.
3. Press SET. The operation varies as indicated below depending on what you are setting.
•
•
•
•
Displaying a Selection Menu and Selecting an Item
Setting Items in a Table
How to Clear Setup Dialog Boxes
Press ESC to clear the setup dialog box from the screen.
3-2
A selection menu appears.
A check box is selected or cleared.
An item is selected.
A table of settings is selected.
Select OFF or ON.
) displayed on it
+
SET
After moving the cursor to the table, press SET
to select the setting that you want to change.
Use the cursor keys and the SET key to
select a table entry.
Displays the selection menu
After selecting an item with
the cursor keys, press SET
to confirm it.
IM WT1801-03EN