YOKOGAWA WT1800 User Manual page 5

Model
Power cord
Language
Options
1 Make sure that the attached power cord meets the designated standards of the country and area
that you are using it in.
2 This features covers firmware versions 2.01 or later of the WT1800.
3 Includes two rolls of paper (B9316FX)
4 The /G5 and /G6 options cannot be installed on the same instrument.
5 One 36-pin connector (A1005JD) is installed in the instrument.
6 The /MTR and /AUX options cannot be installed on the same instrument.
7 This features covers firmware versions 2.11 or later of the WT1800.
No. (Instrument number)
When contacting the dealer from which you purchased the instrument, please tell them the instrument
number.
IM WT1801-03EN
Suffix Code
1
-D
-F
-R
-Q
-H
-N
-HE
-HC
-HG
-HR
/EX1
/EX2
/EX3
/EX4
/EX5
/EX6
/B5
/G5
/G6
/DT
/FQ
/V1
/DA
/MTR
/AUX
/HS
Description
UL/CSA standard power cord (part no.: A1006WD)
[Maximum rated voltage: 125 V]
VDE standard power cord (part no.: A1009WD)
[Maximum rated voltage: 250 V]
BS standard power cord (part no.: A1054WD)
[Maximum rated voltage: 250 V]
AS standard power cord (part no.: A1024WD)
[Maximum rated voltage: 250 V]
GB standard power cord (part no.: A1064WD)
[Maximum rated voltage: 250 V]
NBR standard power cord (Part No.: A1088WD)
[Maximum rated voltage: 250 V]
English menu
Chinese/English menu 2
2
German/English menu
7
Russian/English menu
External current sensor input (for the WT1801)
External current sensor input (for the WT1802)
External current sensor input (for the WT1803)
External current sensor input (for the WT1804)
External current sensor input (for the WT1805)
External current sensor input (for the WT1806)
3
Built-in printer
4
Harmonic measurement
Simultaneous dual harmonic measurement
Delta computation
Add-on frequency measurement
RGB output
5
20-channel D/A output
6
Motor evaluation function
6
Auxiliary input
2
High speed data capturing
Checking the Package Contents
4
iii