YOKOGAWA WT1800 User Manual page 65

3.3 Using USB Keyboards and Mouse Devices
• Setup Menu Operations (Same as soft key operations)
Selecting a Setup Menu Item
Click the setup menu item that you want to select.
If a selection menu appears after you select an item, click the selection menu item that you want
to choose.
If an item has available options such as ON and OFF, click the item to change its setting.
For menu items that are usually selected using the cursor keys and the SET key, clicking on the
item that you want to select will confirm your selection and close the dialog box.
Clearing the Menu
To clear the menu, click outside of it.
• Specifying Values
The following description explains how to specify values for menu items that have a
to them.
• When a menu item has two
the corresponding setting.
• To decrease a value, rotate the mouse wheel back.
• To increase a value, rotate the mouse wheel forward.
• To increase a value, move the pointer above the value so that the pointer becomes a
then click above the value.
• To decrease a value, move the pointer below the value so that the pointer becomes a
then click below the value.
• To move the digit cursor between digits, point to the left or right of the value you want to set so
that the pointer becomes a
one digit to the left or right each time you click.
3-8
Click in this area to display a menu for selecting items using the
cursor keys and SET.
Clicking the item that you want to select will confirm your
selection.
Click in this area to display a selection menu.
Clicking the item that you want to select will confirm your
selection.
Click in this area to change the selected item.
icons, click the top or bottom half of the menu item to select
or a
Click within this area to select the item that you want to set with
the cursor keys.
Change the value by clicking and using the mouse wheel.
, and then click this area. The digit cursor will move
icon next
, and
, and
IM WT1801-03EN