Initializing Settings - YOKOGAWA WT1800 User Manual

3.6

Initializing Settings

This section explains how to reset the WT1800 settings to their factory default values. This feature
is useful when you want to cancel all of the settings that you have entered or when you want to redo
measurement from scratch. For information about the initial settings, see appendix 8, "List of Initial
Settings and Numeric Data Display Order."
UTILITY System Config Menu
Press UTILITY, the System Config soft key, and then the Initialize Settings soft key to display the
following screen.
Initializes the
settings
Settings That Cannot Be Reset to Their Factory Default Values
• Date and time settings
• Communication settings
• Menu and message language settings
To Reset All Settings to Their Factory Default Values
While holding down RESET, turn the WT1800 on. All settings except the date and time settings (display
on/off setting will be reset) and the setup data stored on the internal RAM disk will be reset to their
factory default values.
Note
Only initialize the WT1800 if you are sure that it is okay for all of the settings to be returned to their initial
values. You cannot undo an initialization. We recommend that you save the setup parameters before you
initialize the WT1800.
IM WT1801-03EN
Cancels the initialization
of settings
1
2
3
4
5
6
App
Index
3-13