Workflow - YOKOGAWA WT1800 User Manual

Workflow

The figure below is provided to familiarize the first-time user with the workflow of WT1800 operation.
For a description of an item, see the relevant section or chapter. In addition to the sections and
chapters that are referenced in the figure below, this manual also contains safety precautions for
handling and wiring the instrument. Be sure to observe the precautions.
Installation and Circuit Wiring
Install the WT1800.
Connect the power supply, and turn the power on.
Select the measurement method.
Wire the circuit under measurement.
Read the precautions in sections 2.5 and 2.7 thoroughly before connecting the wires.
Also, if necessary, assemble the input terminal adapter that connects to the voltage
input terminal (see section 2.6) before connecting the wires.
Common Operations
Perform key operations.
Synchronize the clock.
Initialize settings.
Display help.
Set the Measurement Conditions
Basic measurement conditions
Harmonic measurement conditions (option)
Motor evaluation conditions (option)
Auxiliary input conditions (option)
Display Measured/Computed Results
Measured power value and computations
Integrated power (watt hour)
Voltage/current waveforms
Trends
Harmonic measurements (option), bar graphs, vectors
Cursor measurement
Acquire Data
Store data to the internal RAM disk.
Save data to a USB memory device.
Print data (option).
Transmit data using D/A output (option).
Transmit data through the USB, GP-IB,
or Ethernet interface.
xii
Getting Started Guide
Section 2.2
Sections 2.3 and 2.4
Section 2.8
Sections 2.9 to 2.11
Getting Started Guide
Sections 3.1 to 3.4
Section 3.5
Section 3.6
Section 3.7
User's Manual
Chapter 1
Chapter 2
Chapter 3
Chapter 4
User's Manual
Chapters 6 and 7
Chapter 8
Chapter 9
Chapter 10
Chapters 11 and 12
Chapter 14
User's Manual
Chapter 15
Chapters 16 and 17
Chapter 18
Section 20.6
Chapter 19 and the communication
interface user's manual
IM WT1801-03EN