Screen Display - YOKOGAWA WT1800 User Manual

1.3

Screen Display

Display Example When Measuring Power (Numeric display)
Storage status
and storage
count
Input Element Setup Parameters
NULL indicators
Synchronization source
Non-Numeric Displays
Note
The WT1800 LCD may have a few defective pixels. For details, see section 6.2, "Display."
1-12
Setting indicators
• Scaling
• Averaging
• Line filter
• Frequency filter
Peak
over-range
indicator
Data update interval
Data update count
Wiring system
(Input elements of the same wiring unit are indicated with a border.)
Overload
Displayed if the measured value exceeds 140% of the measurement range.
Overflow
Displayed if the measured or computed result cannot be displayed using the specified
decimal place or unit.
No data
Displayed if a measurement function is not selected or if there is no numeric data.
Error
Displayed in cases such as when a measured value is outside of its determined range.
Page bar (indicates the currently displayed page
and the page numbers of displayable pages)
Key lock indicator
Integration
setting/status
Date and time
Input element number
Harmonic group (option)
Voltage range
Current range
Auto range indicators
Integration status
NULL indicator
Settings and measured values
of PLL sources 1 and 2 (option)
Crest factor setting
Input element setup parameters
(for details, see the following
figure)
Motor input or auxiliary input
setup parameters (option)
IM WT1801-03EN