Setting The Message, Menu, And Usb Keyboard Languages - YOKOGAWA WT5000 User Manual

16.4 Setting the Message, Menu, and USB Keyboard
Languages
This section explains operating procedures using the following setup methods.
• Procedure Using the Setup Menu (see chapter 1)
• Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)
Procedure Using the Setup Menu
1. Tap the Setup icon
2. Tap the Utility tab. The utility settings overview screen appears.
Pressing ESC closes the overview screen.
Setting the Language and USB Keyboard (Language, USB
Keyboard)
Tap System Configuration. A system setup (Date/Time, Language, LCD, Preference) appears.
3.
Configure the system.
Set the language of the messages shown on
the screen.
The available languages vary depending on the
suffix code.
Note
You can also display the utility settings overview screen by moving the cursor on the Utility tab using the
arrow keys and then pressing SET.
Procedure Using Keys
See section 16.1.
16-6
► "System Configuration (System Configuration)" in the features guide
, or press MENU under SETUP.
Set the menu language.
The available languages vary depending on the suffix code.
Set the USB keyboard language.
The available languages vary depending on the suffix code.
LCD
(See section 16.5.)
Utility tab
Preference screen
(See section 16.6.)
IM WT5000-02EN