Maintenance & Diagnostics (Ltb) - Siemens SITRANS L Operating Instructions Manual

7.1.9.6 Maintenance & Diagnostics (LTB)
Note
For more detailed explanations of the parameters listed below see the pages referenced.
Navigate to Configure/Setup > LTB > Maintenance and Diagnostics for access to:
Remaining Sensor Lifetime
[see Remaining Sensor LIfetime (4.3.)]
• Lifetime (expected) [see Lifetime (expected) (4.3.1.)]
• Time in Operation [see Time in Operation (4.3.2.)]
• Remaining Lifetime [see Remaining Lifetime (4.3.3.)]
• Activation of Reminders [see Activation of Reminders (4.3.4.)]
• Reminder 1 before Lifetime (Required) [see Reminder 1 before Lifetime (Required)
(4.3.5.)]
• Reminder 2 before Lifetime (Demanded) [see Reminder 2 before Lifetime (Demanded)
(4.3.6.)]
1. Open the window Remaining Sensor Lifetime
2. After modifying values/units as required, click on Apply to accept the change.
• Click on Sensor Replaced to reset Time in Operation to 0 hours
• Click on Snooze for 1 Year to add a year to the Total Expected Sensor Life
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
Remote operation
7.1 Operating via AMS Device Manager
85