Parameterization; Quick Setup; Wizards For Quick Setup - Siemens SITRANS L Operating Instructions Manual

Setup with the integrated HMI
7.4 Parameterization
7.4

Parameterization

Starting
From the measured value view, you can access the parameter view with the " → key,
and by pressing " → again you can access the first menu level.
Select
1.
2.
3.
4.
Change numeric value
1.
2.
3.
4.
5.
6.
7.5

Quick setup

7.5.1

Wizards for quick setup

Overview
A wizard provides a simple step-by-step procedure to configure your device for a
basic application.
To configure the SITRANS LR150 for level, space, distance, volume or volume flow
applications, use the " Quick Commissioning Wizard" via the display.
36
Navigate to the desired parameter.
Press " → to open the edit view. The current selection is highlighted.
Scroll to a new selection with " ↓ and " ↑.
Press " → to confirm. The display returns to the parameter view and shows the
new selection.
Navigate to the desired parameter.
When selected, the current value is displayed.
Press " → for configuration. The symbol " EDIT" flashes.
Use " ↑ and " ↓ to increase or decrease the value. Press and hold the button to
increase the scroll speed.
To cancel without saving your changes, press " ← to return to the parameter
view.
Press " → to confirm the new value. The display returns to the parameter view
(the " EDIT" symbol is permanently displayed) and shows the new selection.
Check that the value is correct.
Operating Instructions, 10/2022, 62711-76-01, A5E50352155
SITRANS LR150