5.5.2 Tone Settings
Description
Value Range
Default Value
DIAL_TONE4_RPT
Value Format
Description
Value Range
Default Value
DIAL_TONE4_TIMING
Value Format
Description
Value Range
Default Value
Web User Interface Reference
BUSY_TONE_FRQ
Value Format
Description
Value Range
Default Value
Web User Interface Reference
208
Administrator Guide
Specifies the gain, in decibels, of Dial Tone 4 (stutter-type dial tone).
-24–6
0
Integer
Specifies whether Dial Tone 4 (stutter-type dial tone) is repeated.
0–1
–
0: No Repeat
–
1: Repeat
0
Comma-separated Integer
Specifies the pattern, in milliseconds, of Dial Tone 4 (stutter dial tones)
to notify that a voice mail is waiting, using up to 22 whole numbers (off
1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
Tone Timings (Page 136)
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of busy tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
480,620
Tone Frequencies (Page 134)
Document Version
2012-02