4.5.2 SIP Settings [Line 1]–[Line x]
4.5.1.1 SIP Setting
SIP User Agent
Description
Value Range
Default Value
Configuration File Reference
4.5.2 SIP Settings [Line 1]–[Line x]
This screen allows you to change the SIP settings that are specific to each line. The number of lines available
varies depending on the phone being used, as follows:
•
KX-UT113/KX-UT123: 1–2
•
KX-UT133/KX-UT136: 1–4
•
KX-UT248: 1–6
Note
•
When registering multiple phone numbers on a KX-UT133/KX-UT136/KX-UT248, it is necessary to set
up DN buttons (flexible buttons). Otherwise, calls cannot be made.
102
Administrator Guide
Specifies the text string to send as the user agent in the headers of SIP
messages.
Max. 40 characters
Note
•
You cannot leave this field empty.
•
If "{mac}" is included in this field, it will be replaced with the
unit's MAC address in lower-case.
•
If "{MAC}" is included in this field, it will be replaced with the
unit's MAC address in upper-case.
•
If "{MODEL}" is included in this field, it will be replaced with the
unit's model name.
•
If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
Panasonic_{MODEL}/{fwver} ({mac})
SIP_USER_AGENT (Page 237)
Document Version
2012-02