Stutter Tone; Tone Frequencies; Tone Timings; Reorder Tone - Panasonic KX-UT113 Administrator's Manual

4.6.4 Tone Settings

4.6.4.4 Stutter Tone

Tone Frequencies

Description
Value Range
Default Value
Configuration File Reference

Tone Timings

Description
Value Range
Default Value
Configuration File Reference

4.6.4.5 Reorder Tone

Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
136 Administrator Guide
Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated by
a comma.
0, 200–2000 (0: No tone)
350,440
DIAL_TONE4_FRQ (Page 207)
Specifies the pattern, in milliseconds, of stutter dial tones to notify that
a voice mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2,
on 2...) separated by commas.
Note
•
It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
DIAL_TONE4_TIMING (Page 208)
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
480,620
REORDER_TONE_FRQ (Page 209)
Document Version 2012-02