Ringback_Tone_Gain; Ringback_Tone_Rpt; Ringback_Tone_Timing; Hold_Alarm_Frq - Panasonic KX-UT113 Administrator's Manual

RINGBACK_TONE_GAIN

Value Format
Description
Value Range
Default Value

RINGBACK_TONE_RPT

Value Format
Description
Value Range
Default Value

RINGBACK_TONE_TIMING

Value Format
Description
Value Range
Default Value
Web User Interface Reference

HOLD_ALARM_FRQ

Value Format
Description
Value Range
Default Value
Document Version 2012-02
Integer
Specifies the gain, in decibels, of the ringback tone.
-24–6
0
Integer
Specifies whether the ringback tone is repeated.
0–1
–
0: No Repeat
–
1: Repeat
1
Comma-separated Integer
Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,2000,3940
Tone Timings (Page 135)
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of the hold alarm using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
425
5.5.2 Tone Settings
Administrator Guide 211