3.1.4 Reset Web ID/Password
Reset Web ID/Password resets all the IDs and passwords required for users and administrators to access the
Web user interface (® see Access Levels (IDs and Passwords) in 1.1.6.3 Before Accessing the Web
User Interface) to their factory defaults. You can perform this operation from the unit.
To perform Reset Web ID/Password
1.
Press
or
Setting
2.
Press [#][7][3][9].
3.
Press [ ] or [ ] to select "Yes" to reset the Web ID/Password, and then press [ENTER].
All the IDs and passwords are reset, and the unit will restart.
Notice
•
For security reasons, it is recommended that the passwords are set again immediately (® see
4.4.2 Administrator Password or 4.4.3 Change User Password).
Document Version
2012-02
.
Setup
3.1.4 Reset Web ID/Password
Administrator Guide
57