5.5.2 Tone Settings
HOLD_ALARM_GAIN
Value Format
Description
Value Range
Default Value
HOLD_ALARM_RPT
Value Format
Description
Value Range
Default Value
HOLD_ALARM_TIMING
Value Format
Description
Value Range
Default Value
CW_TONE1_FRQ
Value Format
Description
Value Range
Default Value
CW_TONE1_GAIN
Value Format
Description
212
Administrator Guide
Integer
Specifies the gain, in decibels, of the hold alarm.
-24–6
0
Integer
Specifies whether the hold alarm is repeated.
0–1
–
0: No Repeat
–
1: Repeat
1
Comma-separated Integer
Specifies the pattern, in milliseconds, of the hold alarm using up to 10
whole numbers (on 1, off 1, on 2, off 2...) separated by commas.
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
120,14880
Comma-separated Integer
Specifies the dual-tone frequencies, in hertz, of call waiting tone 1 using
2 whole numbers separated by a comma.
0, 200–2000 (0: No tone)
425
Integer
Specifies the gain, in decibels, of call waiting tone 1.
Document Version
2012-02