5.5.1 Call Control Settings
Default Value
AUTO_CALL_HOLD
Value Format
Description
Value Range
Default Value
REDIALKEY_CALLLOG_ENABLE
Value Format
Description
Value Range
Default Value
ONHOOK_TRANSFER_ENABLE
Value Format
Description
Value Range
Default Value
DISCONNECTION_MODE
Value Format
Description
Value Range
Default Value
204
Administrator Guide
Y
Boolean
Selects whether calls are disconnected or held when a DN button is
pressed while having a conversation.
•
Y (Enable Auto Call Hold)
•
N (Disable Auto Call Hold)
N
Boolean
Specifies whether the call log is displayed when the Redial button is
pressed while on-hook.
•
Y (Displays outgoing call log by pressing the Redial button.)
•
N (Not display call log by pressing the Redial button.)
N
Boolean
Specifies whether transfer operations are permitted while on-hook.
•
Y (Enable On-hook Transfer)
•
N (Disable On-hook Transfer)
Y
Integer
Selects the tone heard (reorder tone or busy tone) when a dial operation
fails.
1–2
–
1: Mode1 (ROT)
–
2: Mode2 (BT)
1
Document Version
2012-02