4.3.1 Basic Network Settings
Value Range
Default Value
Configuration File Reference
Domain Name Server
Description
Value Range
Default Value
Phone User Interface
Reference
Configuration File Reference
4.3.1.3 Static Settings
Static IP Address
Description
Value Range
Default Value
78
Administrator Guide
Max. 63 characters
Note
•
You cannot leave this field empty.
•
If "{MODEL}" is included in this parameter, it will be replaced
with the unit's model name.
{MODEL}
HOST_NAME (Page 188)
Selects whether to receive DNS server addresses automatically or to
assign a DNS server addresses (up to 2) manually.
Note
•
This setting is available only when [Connection Mode] is set
to [DHCP].
•
Receive DNS server address automatically
•
Use the following settings
–
DNS1
–
DNS2
Note
•
If you select [Use the following settings], specify the IP
address(es) of the primary and, if necessary, secondary DNS
server(s) manually. The permissible values are:
Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Receive DNS server address automatically
Configuring the Network Settings of the Unit (Page 19)
DHCP_DNS_ENABLE (Page 188)
Specifies the IP address for the unit.
Note
•
This setting is available only when [Connection Mode] is set
to [Static].
Max. 15 characters ("n.n.n.n" [n=0–255], except "0.0.0.0",
"255.255.255.255", "127.0.0.1", etc.)
Not stored.
Document Version
2012-02