Before Accessing The Web User Interface - Panasonic KX-UT113 Administrator's Manual

1.1.6 Web User Interface Programming

1.1.6.3 Before Accessing the Web User Interface

Recommended Environment
This unit supports the following specifications:
HTTP Version
Authentication Method
The Web user interface will operate correctly in the following environments:
Operating System
Web Browser
Language (recommended)
Opening/Closing the Web Port
To access the Web user interface, you must open the unit's Web port beforehand. For details, refer to the
Operating Instructions on the Panasonic Web site (® see Introduction).
For details about additional features available with direct commands, see Section 3 Phone User Interface
Programming.
Configuring Settings from the Unit
To open the unit's Web port
1.
Press
Setting
2.
Press [#][5][3][4].
3.
Press [ ] or [ ] to select "On" for "Embedded web", and then press [ENTER].
To close the unit's Web port
1.
Press
Setting
2.
Press [#][5][3][4].
3.
Press [ ] or [ ] to select "Off" for "Embedded web", and then press [ENTER].
Configuring Settings from the Web User Interface
To close the unit's Web port
1.
In the Web user interface, click [Web Port Close].
2.
Click OK.
Note
•
The Web port of the unit will be closed automatically in the following conditions:
–
The port close timer configured through the Web user interface expires (® see [Port Close
Timer] in 4.4.4.1 Web Server Settings).
–
3 consecutive unsuccessful login attempts occur.
•
The Web port can be set to stay open continuously, through Configuration file programming (® see
"HTTPD_PORTOPEN_AUTO" in 5.4.5 HTTP Settings). However, please recognize the possibility of
unauthorized access to the unit by doing so.
22 Administrator Guide
HTTP/1.0 (RFC 1945), HTTP/1.1 (RFC 2616)
Digest (or Basic)
Microsoft
Windows Internet Explorer
browser
English
or .
Setup
or .
Setup
Windows XP or Windows 7 operating system
® ®
7 or Windows Internet Explorer 8 web
®
Document Version 2012-02