6.3.1 Flexible Button Settings
Button
BLF
ACD
Note
•
For details about configuring these settings by configuration file programming, see 5.5.5 Flexible
Button Settings (KX-UT133/KX-UT136/KX-UT248 only).
[Setting Example]
The following screen shows an example of setting flexible buttons.
Description:
•
Button 1 is set to log in and log out of an ACD group on line 1.
•
Button 2 is set to enable or disable talking using the headset.
•
Buttons 3 and 4 are set to make/receive calls on line 1 using ringtone 1.
•
Buttons 5 and 6 are set to make/receive calls on line 2 using ringtone 2.
•
Buttons 7 and 8 are set to make calls to a certain destination using the One-Touch Dialing feature.
•
Buttons 9, 10 and 11 are set to show the status of a certain extension. They can also be used to call that
extension and transfer calls to it.
274
Administrator Guide
Parameter 1
Description
Extension
Up to 32 digits
Number
Line No.
•
1–4 (for KX-UT133/
KX-UT136)
•
1–6 (for KX-UT248)
Value
Description
Parameter 2
Value
–
–
Document Version
–
–
2012-02