Sip_Rcv_Det_Header_N; Sip_Contact_On_Ack_N - Panasonic KX-UT113 Administrator's Manual

5.7.2 SIP Settings
Value Range
Default Value
Web User Interface Reference

SIP_RCV_DET_HEADER_n

Parameter Name Example
Value Format
Description
Value Range
Default Value

SIP_CONTACT_ON_ACK_n

Parameter Name Example
Value Format
Description
Value Range
Default Value
256 Administrator Guide
•
Y (Enable SSAF)
•
N (Disable SSAF)
Note
•
If set to "Y", the unit receives SIP messages only from the
source addresses stored in the SIP servers (registrar server,
proxy server, and presence server), and not from other
addresses. However, if "SIP_OUTPROXY_ADDR_n" in
5.7.2 SIP Settings is specified, the unit also receives SIP
messages from the source address stored in the SIP outbound
proxy server.
N
Enable SSAF (SIP Source Address Filter) (Page 111)
SIP_RCV_DET_HEADER_1, SIP_RCV_DET_HEADER_2, ...,
SIP_RCV_DET_HEADER_6
Boolean
Specifies whether to check the username part of the SIP URI in the
"To" header when receiving the INVITE message with an incorrect
target SIP URI.
•
Y (Enable username check)
•
N (Disable username check)
Note
•
If set to "Y", the unit will return an error reply when it receives
the INVITE message with an incorrect target SIP URI.
•
If set to "N", the unit will not check the username part of the SIP
URI in the "To" header.
N
SIP_CONTACT_ON_ACK_1, SIP_CONTACT_ON_ACK_2, ...,
SIP_CONTACT_ON_ACK_6
Boolean
Specifies whether to add the "Contact" header to SIP ACK message.
•
Y (Add the "Contact" header)
•
N (Do not add the "Contact" header)
N
Document Version 2012-02