Stutter Tone; Tone Frequencies; Tone Timings; Reorder Tone - Panasonic KX-HDV100 Administrator's Manual

4.6.5.4 Stutter Tone

Tone Frequencies

Description
Value Range
Default Value
Configuration File Reference

Tone Timings

Description
Value Range
Default Value
Configuration File Reference

4.6.5.5 Reorder Tone

Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Document Version 2015-02
Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated by
a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "350,440", the unit will use a mixed
signal of a 350 Hz tone and a 440 Hz tone.
350,440
DIAL_TONE4_FRQ (Page 248)
Specifies the pattern, in milliseconds, of stutter dial tones to notify that
a voice mail is waiting, using up to 22 whole numbers (off 1, on 1, off 2,
on 2...) separated by commas.
Note
•
It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
DIAL_TONE4_TIMING (Page 248)
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "480,620", the unit will use a mixed
signal of a 480 Hz tone and a 620 Hz tone.
480,620
REORDER_TONE_FRQ (Page 250)
4.6.5 Tone Settings
Administrator Guide 133