Installation - Swann AMI Powercon Operator's Manual

AMI Powercon
Program List and Explanations

5 Installation

5.1 Sensors
5.1.1
5.1.2
5.1.2.1
5.1.2.2
5.1.2.3
5.1.2.4
5.1.3
5.1.3.1
5.1.4
5.1.4.1
74
Flow:
 None
 Q-Flow
Select "Q-Flow" if the sample flow should be monitored and shown
on the display and when using a SWAN flow cell.
Sensor parameters
Cell Constant: Enter the cell constant printed on the sensor label.
Temp. Corr: Enter the temperature correction printed on the sensor
label.
Cable length: Enter the cable length. Set the cable length to 0.0 m if
the sensors are installed in the flow cell on the AMI monitor.
Meas. unit: Select the measuring unit as s/cm or as s/m.
Temp. comp:
Comp.: Available compensation models are:
 none
 Coefficient
 Neutral salts
 High purity water
 Strong acids
 Strong bases
 Ammonia, Eth.am.
 Morpholine
Quality Assurance:
Level.: Choose the quality level according to your requirements.
 0: Off; Quality Assurance is not active.
 1: Trend (details see
 2: Standard (details see
 3: Crucial (details see
 4: User; edit user specific limits in menu 5.1.4.2 - 5.1.4.4
Quality assurance level, p.
Quality assurance level, p.
Quality assurance level, p.
52)
52)
52)
A-96.250.341 / 061015