Replacing Fuses - Swann AMI Powercon Operator's Manual

AMI Powercon
Maintenance

6.10. Replacing Fuses

60
WARNING
External Voltage.
External supplied devices connected to relay 1 or 2 or to the
alarm relay can cause electrical shocks.
 Make sure that the devices connected to the following con-
tacts are disconnected from the power before resuming in-
stallation.
– relay 1
– relay 2
– alarm relay
When a fuse has blown, find out the cause and fix it before
replacing it with a new one.
Use tweezers or needle-nosed pliers to remove the defective fuse.
Use original fuses provided by SWAN only.
A
A 1.6 AT/250V Instrument power supply
B 1.0 AT/250V Relay 1
C 1.0 AT/250V Relay 2
D 1.0 AT/250V Alarm relay
E 1.0 AF/125V Signal output 2
F 1.0 AF/125V Signal output 1
B C D E F
A-96.250.341 / 061015