Mounting Of Instrument Panel - Swann AMI Powercon Operator's Manual

AMI Powercon
Installation
3.2.
Mounting re-
quirements
A-96.250.341 / 061015

Mounting of Instrument Panel

The first part of this chapter describes the preparing and placing of
the system for use.
 The instrument must only be installed by trained personnel.
 Mount the instrument in vertical position.
 For ease of operation mount it so that the display is at eye
level.
 For the installation a kit containing the following installation
material is available:
– 4 Screws 8x60 mm
– 4 Dowels
– 4 Washers 8.4/24 mm
The instrument is only intended for indoor installation.
23