Swann AMI Powercon Operator's Manual page 9

AMI Powercon
Safety Instructions
Modifications
Download
MSDS
A-96.250.341 / 061015
Modifications and instrument upgrades shall only be carried out by
an authorized Service Technician. SWAN will not accept responsi-
bility for any claim resulting from unauthorized modification or alter-
ation.
WARNING
Electrical Shock Hazard
If proper operation is no longer possible, the instrument must be
disconnected from all power lines, and measures must be taken
to prevent inadvertent operation.
 To prevent from electrical shock, always make sure that
the ground wire is connected.
 Service shall be performed by authorized personnel only.
 Whenever electronic service is required, disconnect in-
strument power and power of devices connected to.
– relay 1,
– relay 2,
– alarm relay
WARNING
For safe instrument installation and operation you must read
and understand the instructions in this manual.
WARNING
Only SWAN trained and authorized personnel shall perform the
tasks described in this document.
The current Material Safety Data Sheets (MSDS) for the Reagents
listed below are available for downloading at www.swan.ch.
Product name:
Catalogue number:
Cation Exchange Resin
A-82.841.030 and A-82.841.031
7