Power Supply - Swann AMI Powercon Operator's Manual

AMI Powercon
Installation
3.5.2
Installation
requirements
30

Power Supply

WARNING
Risk of electrical shock
Do not perform any work on electrical components if the trans-
mitter is switched on. Failure to follow safety instructions could
result in serious injury or death.
 Always turn off AC power before manipulating electric parts.
 Installation and maintenance of electrical parts must be per-
formed by professionals.
A
B
C
D
A Power supply connector
B Neutral conductor, Terminal 2
C Phase conductor, Terminal 1
D Protective earth PE
Note:The protective earth wire (Ground) has to be connected to
the grounding terminal.
The installation must meet the following requirements.
 Fuse 1.6 AT
 Mains cable to comply with standards IEC 60227 or IEC
60245; flammable rating FV1
 Mains equipped with an external switch or circuit-breaker
– near the instrument
– easily accessible to the operator
– marked as interrupter for AMI Powercon
A-96.250.341 / 061015