Swann AMI Powercon Operator's Manual page 40

AMI Powercon
Instrument Setup
Measuring unit
External
devices
Limits Alarms
Temp.
Compensation
Quality
Assurance
38
Menu 5.1.1.2
Set the <Measuring unit> according to your requirements:
 S/cm
 S/m
Program all parameters for external devices (interface, recorders,
etc.) See program list and explanations
and 4.2 Relay Contacts, p.
Program all parameters for instrument operation (limits, alarms).
See program list and explanations
Menu 5.1.3
Choose between:
 none
 Coefficient
 Neutral salts
 High-purity water
 Strong acids
 Strong bases
 Ammonia, Ethanolamine
 Morpholine
Menu 5.1.4
Set the Level according to your requirements, details see
Assurance of the Instrument, p.
5.2 Signal Outputs, p. 75
73.
4.2 Relay Contacts, p.
52.
73.
Quality
A-96.250.341 / 061015