Swann AMI Powercon Operator's Manual page 88

AMI Powercon
Program List and Explanations
5.5 Interface
5.5.1
5.5.20
5.5.30
5.5.40
5.5.1
5.5.21
5.5.31
5.5.41
5.5.1
5.5.23
5.5.1
5.5.24
5.5.1
86
Select one of the following communication protocols. Depending on
your selection, different parameters must be defined.
Protocol: Profibus
Device address:
ID-Nr.:
Local operation:
Protocol: Modbus RTU
Device address:
Baud Rate:
Parity:
Protocol: Hyper Terminal
Baudrate:
see separate RS232 Operation Manual for Logger download.
Protocol: Webserver:
Device address:
see separate Webserver Manual.
Protocol: USB-Stick:
Only visible if an USB interface is installed. No further settings are
possible.
Range: 0–126
Range: Analyzer; Manufacturer; Multivariable
Range: Enabled, Disabled
Range: 0–126
Range: 2 400–115 200 Baud
Range: none, even, odd
Range: 2 400–115 200 Baud
Bereich: 0–126
A-96.250.341 / 061015