Replace The Deaeration Tubes - Swann AMI Powercon Operator's Manual

AMI Powercon
Maintenance
6.7.
Preparation
50

Replace the Deaeration Tubes

Depending on your application, it might be necessary to change the
deaeration tube, e.g. when contaminated with iron.
Note:There are two different tubes:
 The deaeration tube [F] of the cation exchanger bottle has an
inner diameter of 1 mm.
 The deaeration tube [E] of the pre-rinse bottle, has an inner
diameter of 2 mm.
1 Close the main tap to stop the sample flow.
2 Remove cation exchanger bottle from the bottle holder [H].
K
J
A Flow cell
B Flowmeter
C Pre-rinse inlet
D Sample collector
E Deaeration tube pre-rinse
bottle
F Deaeration tube exchanger
bottle
G Tube fitting
H Bottle holder cation
exchanger bottle
I Panel
J Bottle holder pre-rinse bottle
K Flow regulating valve
A-96.250.341 / 061015
A
B
C
D
E
F
G
H
I