Signal Outputs; Signal Output 1 And 2 (Current Outputs); Signal Output 3 (Optional) - Swann AMI Powercon Operator's Manual

AMI Powercon
Installation
3.8.
3.8.1
3.8.2
34

Signal Outputs

Signal Output 1 and 2 (current outputs)

Note:Max. burden 510
If signals are sent to two different receivers, use signal isolator
(loop isolator).
Signal output 1: Terminals 14 (+) and 13 (-)
Signal output 2: Terminals 15 (+) and 13 (-)
For programming see

Signal Output 3 (optional)

Requires the additional board for the third signal output 0/4–20 mA
PCB
Note:Max. burden 510
The third signal output is installed in the upper holder on the main
board. You can operate either 3. signal output or communication in-
terface, not both!
Terminal 38 (+) and 37 (-).
.
A Third signal output 0/4 - 20 mA PCB installed on main board

Program Overview, p.

.
A
65, Menu Installation
A-96.250.341 / 061015