AMI Powercon
Installation
3.5.
Cable
thicknesses
Wire
A-96.250.341 / 061015
Electrical Connections
WARNING
Electrical hazard.
Always turn off AC power before manipulating electric
parts.
Grounding requirements: Only operate the instrument
from an power outlet which has a ground connection.
Make sure the power specification of the instrument corre-
sponds to the power on site.
In order to comply with IP66, use the following cable thicknesses
A
A
PG 11 cable gland: cable Ø
B
PG 7 cable gland: cable Ø
C
PG 9 cable gland: cable Ø
Note:Protect unused cable glands
For Power and Relays: Use max. 1.5 mm
stranded wire with end sleeves.
For Signal Outputs and Input: Use 0.25 mm
stranded wire with end sleeves.
B
C
5–10 mm
outer
3–6.5 mm
outer
4–8 mm
outer
2
/ AWG 14
2
/ AWG 23
27