Troubleshooting - Eaton Powerware Prestige Series 1500 VA Installation And Operator's Manual

C H A P T E R 7
T
ROUBLESHOOTING
The Prestige UPS is designed for durable, automatic operation and also
alerts you whenever potential operating problems may occur. Use the
following troubleshooting chart to determine the UPS alarm condition.
Condition
UPS does not turn on.
Load does not turn on.
UPS beeps occasionally.
UPS circuit breaker trips.
indicator remains
lit, even though line
voltage is present. voltage is present
UPS does not provide the
expected backup time.
Powerware ® Prestige Series Installation and Operator's Manual for IBM Applications (650 VA - 1500 VA) Uncontrolled Copy
Indicator Legend
Unlit
Amber
Green
Flashing
Possible Cause
UPS is not plugged in.
Faulty wall socket.
UPS circuit breaker is tripped.
UPS has not been activated.
Normal operation.
Load fault.
Utility line is out of
specification.
UPS circuit breaker is tripped.
Low battery capacity.
Protected equipment power
requirements exceed UPS
capacity.
Action
Plug UPS into working outlet.
Test wall socket, repair as required.
Reduce load, then reset breaker.
Press the Output On button for one
|
second, then release.
None. UPS is protecting your equipment.
Check the load.
Disconnect faulty load equipment.
Wait several minutes before resetting the
UPS circuit breaker.
Restart the load.
Test wall socket, repair as required.
Reduce load, then reset breaker.
Allow battery to charge for 24 hours, then
retest.
Reduce load, then retest.
73