Eaton Powerware Prestige Series 1500 VA Installation And Operator's Manual page 6

Quick Install
230V Model Installation
NOTE For 208, 220, or 240V models, follow the instructions for changing the output voltage on
page 39.
1
If you are connecting the UPS to an AS/400, the QUPSDLYTIM system value for the UPS
Monitoring feature should be set. See "UPS Monitoring" on page 54 for instructions.
2
3
For the AS/400 interface, plug the AS/400 communications cable into the serial port on the
UPS rear panel. Plug the other end of the cable into the connector, located on the back of
the system unit, labeled "UPS" (AS/400 Models 2xx/4xx/170).
4