Using The Last Position Memory Function; Activating Other Chair Programs - Sirona Sinius CS Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions SINIUS / SINIUS CS
63 22 726 D3561
D3561.201.01.03.02 05.2012
4.4.7.3

Using the last position memory function

Using the last position memory function
The last chair position is stored before the patient chair moves to mouth
rinsing position S. When mouth rinsing position key
the treatment center returns to the previously set treatment position.
✔
The patient chair is located in any treatment position.
S
1. Press the
interface of the assistant element, or press the left button of the foot
control (with all instruments in place in their holders).
 The treatment center moves to the mouth rinsing position.
S
2. Press the
assistant element, or press the left button of the foot control again.
 The treatment center automatically returns to the position where
the patient chair was located prior to the mouth rinsing position.
4.4.7.4

Activating other chair programs

✔
Start program
The
Activating other chair programs
➢ Touch the
key on the touchscreen, or press the
key on the touchscreen, or on the user interface of the
is displayed on the touchscreen.
1 2
key or the key briefly (< 2 s).
4 Operation
4.4 Patient chair
S
is pressed again,
S
key on the user
69